Yamaha YBR125ESD 2008-2018 Fuel Tank Mounting Rubbers
Aftermarket fuel-tank locating rubber set for Yamaha YBR125ESD models whose Yamaha fuel-tank fiches specify the same 4FP-F4181-00, 5VL-F4183-00 and 5VL-F4182-00 mounting dampers.
What These Rubbers Do
The fuel tank is not intended to sit directly against the motorcycle frame. These rubber locating dampers support and locate the tank while helping isolate engine and road vibration, reducing rattles and limiting metal-to-metal contact. Old mounts can harden, split, flatten, go missing during servicing or allow the tank to move more than intended.
OEM Comparison References
The Yamaha fuel-tank diagrams used for this fitment audit specify the following locating dampers:
- 4FP-F4181-00 - Damper, Locating 1 - Yamaha specifies 2 per tank on the supported YBR125 applications
- 5VL-F4183-00 - Damper, Locating 3 - Yamaha specifies 1
- 5VL-F4182-00 - Damper, Locating 2 - Yamaha specifies 1
These Yamaha numbers are supplied only as fitment / search references. This listing is for aftermarket replacement rubber components and is not represented as Genuine Yamaha.
Important Package-Contents Note
The OEM mounting arrangement uses four rubber pieces in total (2 + 1 + 1). Use the listing photographs as the final guide to the exact number and shapes supplied with SKU 02266-BWF. Washers, bolts, fuel tank, fuel tap and other hardware are not included unless they are visibly shown with the stock.
Symptoms of Worn or Missing Tank Mounts
- Fuel tank movement or looseness when the bike is stationary
- Buzzing, rattling or vibration from the tank area
- Perished, cracked, flattened or missing rubber supports
- Metal-to-metal contact marks around tank mounting points
- Poor tank seating after removal for maintenance
Installation Guidance
- Work with the motorcycle stable and the engine cold.
- Follow Yamaha's fuel-tank removal procedure and take suitable precautions around petrol.
- Compare every new rubber with the old mounting position before refitting the tank.
- Make sure the tank sits fully on its locating rubbers and does not trap hoses or wiring.
- Reconnect fuel lines / tap components correctly and check carefully for leaks before riding.
- After installation, confirm the tank is secure and cannot contact the frame where it should be rubber isolated.
Fitment Warning
Yamaha produced several YBR / YB variants that look similar but do not all use the same complete tank-rubber set. Match the model code where possible and compare the original rubber shapes. In particular, some YB125 / Custom-style applications use a different locating-3 damper even though the two 4FP-F4181-00 front locating dampers may be shared.
Confirmed Application
- Yamaha YBR125ESD - 2008
- Yamaha YBR125ESD - 2010
- Yamaha YBR125ESD - 2012
- Yamaha YBR125ESD - 2014
- Yamaha YBR125ESD - 2018
- Intervening market years only where the original fuel-tank damper arrangement matches
Fitment note: Yamaha fiches confirm all three core damper references on documented YBR125ESD examples from 2008 through 2018. Always compare the physical mount layout if the motorcycle has a replacement tank or has been modified.
Product type: Aftermarket fuel-tank locating / mounting rubber set for the supported Yamaha YBR125 family.