Suzuki GZ125 HS / Marauder 1998-2011 14T Front & 46T Rear Sprocket Set
Brand new aftermarket front and rear sprocket set for the Suzuki GZ125 HS / Marauder 1998-2011, supplied in a 14-tooth front / 46-tooth rear configuration for a 428 chain.
Kit Contents
- 1 x 14T front sprocket
- 1 x 46T rear sprocket
Specification
- Front sprocket: 14 teeth
- Rear sprocket: 46 teeth
- Chain pitch: 428
- Final-drive ratio: approximately 3.29:1
- Application: Suzuki GZ125 HS / Marauder 1998-2011
- SKU: 01876-DNT
Gearing Information
The commonly catalogued standard GZ125 gearing is 15T front / 45T rear with a 428 x 132-link chain. This 14T / 46T set is therefore a lower-geared aftermarket combination, not the standard OEM tooth count.
Compared with the common 15/45 setup, the 14/46 ratio is approximately 9.5% shorter. This generally gives stronger acceleration and easier pull-away, while engine rpm will be higher at the same road speed and maximum-speed potential may be reduced.
Important Fitment Check
Before installation, compare the front-sprocket spline, rear-sprocket bolt pattern, sprocket offset and 428 chain pitch with the parts removed from the motorcycle. Confirm chain adjustment after fitting.
Replace worn chain and sprockets together where possible. A worn chain can quickly damage new sprockets.
Search Terms
Suzuki GZ125 sprocket set, GZ125 HS sprockets, GZ125 Marauder sprocket kit, 14T front sprocket, 46T rear sprocket, 428 sprocket set, Suzuki 125 gearing kit, GZ125 lower gearing.
Condition: Brand new unbranded aftermarket replacement set.