KTM 620 / 625 / 640 LC4 Front Brake Pads FA181
Replacement brake pad set using the FA181 / FDB2018 pad profile for the compatible applications listed below.
Cross-Reference Numbers
- EBC FA181
- Ferodo FDB2018
- Galfer FD138
- TRW / Lucas MCB648
- SBS 671
- Vesrah VD-947
- Brembo 07BB04
- Braking 746
- Goldfren 031
Fitment Reference Dimensions
- Pad outline: approximately 94 × 36.5 mm
Different manufacturers may round the published outline measurement slightly. Compare the backing-plate shape and mounting arrangement with the pads currently fitted.
Vehicle Compatibility
| Make | Model | Years | Position | Notes |
|---|---|---|---|---|
| KTM | SX / EXC / EGS 620 | 1994–1995 | Front | |
| KTM | SX 620 | 1996–1998 | Front | |
| KTM | SC 620 Supercompetition | 1996–2000 | Front | |
| KTM | EGS / EGS-E / LSE 620 Enduro | 1996–1999 | Front | |
| KTM | EGS-E 620 Adventure / Rallye | 1999 | Front | |
| KTM | LC4 620 SC Supermoto | 2000 | Front | |
| KTM | SXC 625 | 2003–2006 | Front | |
| KTM | LC4-E 640 Enduro | 2000–2004 | Front | |
| KTM | LC4-E 640 Supermoto | 2000–2006 | Front | |
| KTM | LC4 640 Adventure / Adventure R | 1999–2006 | Front | Variant-specific years |
| KTM | LC4 625 SC Supermoto / Supercompetition | 2002 | Front |
What's Included
- 1 × Pair of brake pads for one compatible caliper
Important Fitment Information
FA181 is used as a front pad on some vehicles and a rear pad on others. Use the brake position shown in the table above. Compare the pad outline, mounting arrangement and fitted caliper with the product photographs before ordering.
Cross-reference numbers identify the application / pad-shape family only. They do not mean the supplied pads are manufactured by EBC, Ferodo, Galfer, TRW, SBS, Vesrah, Brembo or another referenced manufacturer.
Delivery & Returns
- Free UK delivery with an estimated 2–3 working-day service
- 30-day returns, subject to the item being returned in its original condition
Important Safety Information
Brake components are safety-critical. Installation should be carried out by a competent person or qualified technician. The braking system should be inspected and tested before the vehicle is returned to use.