Honda CG125 Side Stand Kickstand Kit – 240mm
Aftermarket 240 mm side/kick stand assembly for Honda CG125 motorcycles. Supplied with the return spring and pivot fixing hardware shown in the listing. Honda CG125 specifications changed by year and market, so compare the stand and pivot dimensions with the part removed from the motorcycle.
Kit Contents / Components
- Black-finished steel side stand / kickstand bar
- Forked / clevis-style upper pivot mounting end
- Welded spring anchor peg on the stand
- Coiled tension return spring
- M10 shoulder-style pivot bolt
- Hex fixing nut
- Welded ground-contact foot at the lower end of the stand
Product Specifications
- Approximate stand length: 240 mm / 24 cm
- Return spring wire thickness: approximately 3 mm (supplier specification)
- Supplied fasteners use approximately 16 mm / 17 mm hex sizes
- Pivot bolt: M10 thread
- Approximate threaded section: 17 mm
- Approximate shoulder length: 16.5 mm
- Approximate shoulder outside diameter: 12 mm
- Black finish
- Aftermarket replacement product; not supplied as a confirmed Honda Genuine Parts item
Listed Fitment
- Honda CG125 – aftermarket supplier's primary stated application.
- Catalogue research confirms 50530-383-000 / 50530-383-000ZA on multiple CG125 generations, but later variants can use different spring or pivot hardware.
Honda OE / Part Number Cross-References
These numbers are provided as catalogue and identification references. Honda used different stand hardware by year and market, and they should not be treated as a guarantee that every referenced genuine component is dimensionally identical to this unbranded kit.
- 50530-383-000 – Honda STAND COMP., SIDE; the strongest catalogue reference for many CG125 applications.
- 50530-383-000ZA – Honda black-finish side-stand assembly reference shown on selected CG125 catalogues.
- 90108-223-000 – Honda stand-pivot screw shown on earlier CG125 catalogues.
- 90107-GN1-010 – Honda side-stand pivot screw/bolt used on later CG125 catalogues.
- 95014-72102 – Honda side-stand spring shown on selected CG125 / CG Cargo catalogues.
- 94002-10000-0S / 90304-GE8-003 / 90304-GBL-003 – 10 mm stand-fastener nut references vary by year and market.
Aftermarket manufacturer MPN: no reliable manufacturer-assigned MPN was found for this unbranded kit. Seller SKU 00245-FPP is an internal stock reference, so the Google Shopping MPN field has intentionally been left blank.
Compatibility Check Before Ordering
- Measure your original stand from the pivot area to the foot and compare it with the approximate 240 mm length.
- Compare the fork/clevis width, spring anchor position and pivot-bolt shoulder with the listing photographs.
- Check that your motorcycle uses an M10 pivot arrangement compatible with the supplied shoulder bolt.
- Do not order only by model name: Honda changed stand assemblies between years, production countries and CB125 generations.
Installation Note
The return spring is under tension. Secure the motorcycle safely before removing or fitting the stand and use suitable tools. If you are unsure about installation or compatibility, use a competent motorcycle technician.
Delivery & Returns
- Free UK delivery with an estimated 2–3 working-day service
- 30-day returns, subject to the item being returned in its original condition