Honda CB125F GLR125 2015-2020 Clutch Basket / Clutch Outer
New unbranded aftermarket clutch outer assembly for Honda CB125F / GLR125 models from 2015 to 2020. This is the outer clutch basket that carries the friction-plate tabs and incorporates the large primary-driven gear and cush/damper mechanism.
Components Identified in the Photos
- 1 complete clutch outer / clutch basket assembly
- Integral large primary-driven gear
- Built-in torsional cush / damper spring mechanism visible through the spring windows
- Outer basket fingers / slots for the friction-plate tabs
- Central locating sleeve / boss area for the clutch-outer guide
- Riveted assembled construction as shown
What Is Not Included
This listing is for the clutch outer / basket only. The inner clutch drum / centre, friction plates, steel separator plates, pressure plate, lifter plate, clutch springs, centre nut, washers, bearing and clutch-outer guide are separate parts and are not included unless specifically shown.
Honda OE / OEM Reference
- Clutch outer / basket: 22100-KPN-A31
- Associated clutch-outer guide: 22115-KSP-910 - not included
Manufacturer / Aftermarket Cross References
- Wemoto: AH7817
- XY / aftermarket manufacturer reference: 22100-KPN-A31-M1
OE and aftermarket references are supplied for identification and compatibility checking only. The item supplied is an unbranded aftermarket replacement and is not represented as a genuine Honda, Wemoto or XY component.
Fitment
- Honda CB125F / GLR125 - 2015
- Honda CB125F / GLR125 - 2016
- Honda CB125F / GLR125 - 2017
- Honda CB125F / GLR125 - 2018
- Honda CB125F / GLR125 - 2019
- Honda CB125F / GLR125 - 2020
- GLR1251WHF / GLR1252WHF / GLR1251WHH applications using Honda clutch outer 22100-KPN-A31
Important Compatibility Information
Honda used different clutch designs on earlier CBF125 models and on the redesigned 2021-on CB125F. Before ordering, compare the original clutch outer with the photographs and check the OE number, primary gear, basket-finger layout, central bore/guide arrangement and overall dimensions.
The safest compatibility check is to confirm that the original clutch outer cross-references to 22100-KPN-A31.
Typical Reasons for Replacement
- Grooved or notched clutch-basket fingers causing poor plate movement
- Excessive play or noise from the clutch-outer cush/damper mechanism
- Damage to the primary-driven gear teeth
- Impact or wear damage to the basket body
- Clutch drag, judder or inconsistent engagement caused by a worn outer basket
Installation Notes
Installation requires removal of the right engine cover and clutch assembly. Inspect the clutch-outer guide, centre components, bearing, washers and clutch plates while the assembly is dismantled. Reassemble in the correct order and tighten all fasteners to Honda workshop specifications. A new right crankcase-cover gasket is recommended whenever the cover is removed.
Delivery & Returns
- Free UK delivery with an estimated 2-3 working-day service
- 30-day returns, subject to the item being returned in its original condition