Honda CB125 Side Stand Kickstand Kit – 240mm
Aftermarket 240 mm side/kick stand kit sold for selected Honda CB125 applications, supplied with return spring, pivot bolt and nut. The CB125 name covers several very different generations, so this listing is intended for classic/earlier-pattern machines only where the dimensions and mounting arrangement match.
Kit Contents / Components
- Black-finished steel side stand / kickstand bar
- Forked / clevis-style upper pivot mounting end
- Welded spring anchor peg on the stand
- Coiled tension return spring
- M10 shoulder-style pivot bolt
- Hex fixing nut
- Welded ground-contact foot at the lower end of the stand
Product Specifications
- Approximate stand length: 240 mm / 24 cm
- Return spring wire thickness: approximately 3 mm (supplier specification)
- Supplied fasteners use approximately 16 mm / 17 mm hex sizes
- Pivot bolt: M10 thread
- Approximate threaded section: 17 mm
- Approximate shoulder length: 16.5 mm
- Approximate shoulder outside diameter: 12 mm
- Black finish
- Aftermarket replacement product; not supplied as a confirmed Honda Genuine Parts item
Listed Fitment
- Honda CB125 / classic CB125 family – seller-listed application; verify the mounting end and 240 mm length before purchase.
- Vintage replacement references associate 50530-383-000 with CB125S / CB125J / CB125JX, while early Honda CB125S catalogues also show 50530-107-700B.
- Not a blanket fitment claim for CB125E, CB125F or CB125R.
Honda OE / Part Number Cross-References
These numbers are provided as catalogue and identification references. Honda used different stand hardware by year and market, and they should not be treated as a guarantee that every referenced genuine component is dimensionally identical to this unbranded kit.
- 50530-383-000 – widely cross-referenced to classic Honda CB125S / CB125J / CB125JX applications by vintage replacement-part sources.
- 50530-107-700B – Honda BAR, SIDE STAND used in early CB125S catalogues; this is a different catalogue family and should be compared physically before ordering.
- 90108-223-000 – Honda side-stand pivot screw shown on early CB125S catalogues.
- 95014-72102 – Honda side-stand spring; replaces earlier 95014-72101 on applicable classic Honda catalogues.
Aftermarket manufacturer MPN: no reliable manufacturer-assigned MPN was found for this unbranded kit. Seller SKU 00245-FPP is an internal stock reference, so the Google Shopping MPN field has intentionally been left blank.
Compatibility Check Before Ordering
- Measure your original stand from the pivot area to the foot and compare it with the approximate 240 mm length.
- Compare the fork/clevis width, spring anchor position and pivot-bolt shoulder with the listing photographs.
- Check that your motorcycle uses an M10 pivot arrangement compatible with the supplied shoulder bolt.
- Do not order only by model name: Honda changed stand assemblies between years, production countries and CB125 generations.
Installation Note
The return spring is under tension. Secure the motorcycle safely before removing or fitting the stand and use suitable tools. If you are unsure about installation or compatibility, use a competent motorcycle technician.
Delivery & Returns
- Free UK delivery with an estimated 2–3 working-day service
- 30-day returns, subject to the item being returned in its original condition