Honda C50 C70 C90 12V White Modified Leg Shield
Aftermarket custom modified / cut-down leg shield for selected Honda Cub C50, C70 and C90 12V motorcycles using the round air-filter layout. This is a styling/bodywork panel rather than a standard full-width replacement leg shield.
What Is Supplied
- 1 x white molded-plastic modified leg shield / front inner body panel
- Integrated centre spine / ribbed centre section
- Upper steering-head / frame opening
- Cut-down side edges for a custom, more open engine-area appearance
- Lower mounting tabs and fixing holes formed into the panel
Product Details
- Colour: white
- Material: molded plastic
- Position: front / centre leg-shield area
- Style: modified / cut-down custom leg shield
- Designed around the Honda Cub 12V round-air-filter bodywork family
- Aftermarket replacement/custom panel – not supplied as a Genuine Honda body panel
- Fixing bolts, badges, trim pieces and inspection covers are not assumed included unless shown in the listing photos
Fitment Guide
- Honda C50 12V – selected round-air-filter Cub versions where the mounting points and modified panel shape match.
- Honda C70 12V – selected round-air-filter Cub versions; compare the original leg-shield mounting points before ordering.
- Honda C90 12V – selected round-air-filter Cub versions; this is the same general bodywork family used by many later 1980s/1990s Cubs.
- Comparable full-size round-air-filter leg shields are commonly catalogued for C50/C70/C90 models from approximately 1984–1996, but this modified panel should be purchased by shape and mounting layout rather than year alone.
Important Compatibility Notes
- This is a modified/cut-down shield. It does not provide the same full leg coverage as a standard OEM-style Cub leg shield.
- Confirm your motorcycle uses the round air-filter layout. Rectangle-air-filter versions use different leg-shield shapes.
- Electric-start, kick-start, square-headlight and round-headlight Cub versions can use different lower cut-outs and mounting arrangements.
- Compare all fixing holes, the upper frame opening, lower mounting tabs and engine/air-filter clearance with the photographs before ordering.
Honda OE / Aftermarket Cross-References
Because this panel has been modified from the original full-width style, there is no single Honda OE number that exactly describes the finished cut-down part. The references below are useful for identifying the underlying Cub leg-shield families only.
- 64301-GB4-690 – Honda-compatible reference used for a full white C50/C70/C90 Custom 12V electric-start / square-headlight leg shield. Useful as a base-profile reference only; this stock item is visibly modified/cut down.
- Minimoto 6699 / M41-6699 – aftermarket full white C50/C70/C90 12V Custom leg-shield reference compatible with 64301-GB4-690.
- OORacing 251510 – aftermarket full C90 electric-start round-air-filter leg-shield reference; useful for round-air-filter bodywork comparison.
- 64301-GB4-680 / Minimoto 6698 – alternative C50 Custom leg-shield family; do not assume interchangeability.
- 64301-GB4-000 / Minimoto 6700 – C50 Standard/Deluxe leg-shield family; a different application and not a direct reference for this modified panel.
Aftermarket manufacturer MPN: not confirmed for this stock item. Seller SKU 02027-BWF is an internal stock reference. The Google Shopping MPN field is therefore left blank.
Before Ordering
- Compare the photographs with your existing bodywork from both sides of the motorcycle.
- Check the air-filter shape, starter arrangement and headlight/body style.
- Expect normal aftermarket molding tolerances; imported Cub panels can require minor hole alignment, deburring or finishing during installation.
- If you require a factory-standard full-size leg shield, choose the correct unmodified shield for your exact Cub version instead.
Installation Note
Body-panel fitment can vary because of previous frame repairs, replacement engines and aftermarket bodywork. Test-fit the panel before drilling, trimming or permanently modifying it. Use suitable washers/spacers and avoid overtightening plastic mounting points.
Delivery & Returns
- Free UK delivery with an estimated 2–3 working-day service
- 30-day returns, subject to the item being returned in its original condition