6PK2260 6-Rib Serpentine / Auxiliary Poly-V Drive Belt
Brand new aftermarket 6PK2260 auxiliary drive belt for vehicles using the matching six-rib PK-profile belt and accessory-drive layout. Suitable for replacing a worn, cracked, glazed, noisy or frayed alternator / auxiliary belt where 6PK2260 is specified.
Product Specification
- Belt size: 6PK2260
- Profile: PK / Poly-V / multi-rib
- Number of ribs: 6
- Nominal length: 2260 mm
- Approximate width: 21–21.36 mm
- Drive type: Single-sided auxiliary / serpentine belt
- Position: Engine auxiliary drive system
- Quantity: 1 belt
- Condition: Brand New
- Type: Aftermarket replacement
- SKU: 6PK2260
OE / OEM Reference Numbers
The following OE numbers are cross-referenced by major aftermarket belt catalogues to the 6PK2260 / equivalent belt family. Always confirm the OE number and vehicle accessory layout before ordering.
- Audi / VAG: 078903137K, 078903137P
- Dodge / Jeep: 5103565AA, 68027636AA, 68045801AA
- Mazda: LFA115909, LFA1159099F, LFH1-15-909B, LF1915909A, LF1915909B
- Mercedes-Benz: 0019938696, 0089971892, 0129974892, 0139972392, 0149970692, 0149970792, 0149971792, 6119972292, 6119973092
- Opel / Vauxhall: 1340615, 1854714, 1854723, 90448002, 90500354, 90501385
- Porsche: 99610215193
- Toyota / Lexus: 90916-02462 / 9091602462
Aftermarket Cross-References
- Gates: 6PK2260 / 68466
- Continental / ContiTech: 6PK2260
- Bosch: 1 987 947 960, 1 987 948 495
- Blue Print: AD06R2260 / AD06R2257
- Dayco: 6PK2263
- Febi Bilstein: 29018
- Hutchinson: 2260K6
- INA: FB6PK2260 / 537 0210 10
- MEYLE: 050 006 2260
- Quinton Hazell: QBR62260 / QBR62263
- SKF: VKMV 6PK2260
- SWAG: 10 92 9018
Selected Vehicle Compatibility
This belt size is used on a wide range of vehicles. The applications below are examples with documented 6PK2260 / matching-OE cross-reference; fitment is still dependent on engine, model year, air-conditioning/accessory equipment and belt routing.
- Audi 100 2.8 V6: selected 1992–1994 single-belt-drive applications using 078903137P. Vehicles converted to the later tensioner arrangement may require a shorter belt.
- Mazda 6 / Atenza: selected saloon, sport and wagon applications using LFA115909 / LFH1-15-909B.
- Mercedes-Benz: selected Sprinter CDI, Vito and Viano applications using the matching Mercedes OE belt references above.
- Opel / Vauxhall Omega B: selected 2.5 V6 X25XE and 3.0 V6 X30XE applications using the 21.36 x 2260 mm belt / 90448002 / 1854714 family.
- Dodge / Jeep: selected 2008–2010 Dodge Durango / Ram 1500 and Jeep Commander / Grand Cherokee 3.7L or 4.7L applications using 68027636AA.
- Porsche 911 GT3: selected 996 GT3 / GT3 RS and 997 GT3 air-conditioning applications using 99610215193.
- Toyota Celsior / Lexus LS: selected UCF20 / UCF21 4.0 1UZ-FE applications using 90916-02462 / equivalent 6PK2260 belt.
Important Compatibility Check
Do not order by vehicle model alone. A vehicle can use different auxiliary belts depending on engine, alternator, air conditioning, power steering, tensioner revision and market specification.
- Check the marking printed on the old belt — ideally it should read 6PK2260 or a confirmed equivalent.
- Confirm the original vehicle OE number where possible.
- Confirm six ribs and approximately 2260 mm nominal belt length.
- Compare the belt routing and accessory arrangement.
- If the original belt marking or OE number does not match, verify fitment by VIN / engine code before purchase.
What's Included
1 x 6PK2260 six-rib auxiliary / serpentine drive belt. Tensioners, idler pulleys and other hardware are not included.
Installation Advice
Inspect the automatic tensioner, idler pulleys and accessory pulleys before fitting a new belt. Replace damaged or noisy components as required and follow the vehicle manufacturer's routing diagram and tensioning procedure. Make sure every rib is correctly seated before starting the engine.
Shipping Information
Comparable 6PK2260 belts weigh approximately 215–230 g before dispatch packaging. Shopify shipping weight is therefore set to approximately 300 g, with estimated packed dimensions of 30 x 25 x 5 cm.